Software compatibility |
- Cisco Collaboration Endpoint Software Version 9.0 or later, or Cisco Spark Room OS
|
Default components in Cisco Spark Room Kit Plus |
- Cisco Spark Codec Plus
- Cisco Quad Camera
- Cisco Touch 10
- Wall mount for Quad Camera
|
Optional hardware components |
- Table Microphone 20, Wall mount for Codec Plus, cables
|
Bandwidth |
- Up to 6 Mbps point-to-point
|
Minimum bandwidth for resolution/frame rate |
H.264
- 720p30 from 768 kbps
- 720p60 from 1152 kbps
- 1080p30 from 1472 kbps
- 1080p60 from 2560 kbps
|
Firewall traversal |
- Cisco Expressway™ technology
- H.460.18, H.460.19 firewall traversal
|
Video standards |
|
|
- One HDMI input supports formats up to maximum 1080p60
- Two HDMI inputs support formats up to maximum 4K (3840 x 2160) at 30 fps including HD1080p60
- Consumer Electronics Control (CEC) 2.0
|
Video outputs |
- Two HDMI outputs support formats up to 3840 x 2160p60 (4Kp60)
- Live video resolutions (encode and decode) up to 1920 x 1080p60 (HD1080p)
- Consumer Electronics Control (CEC) 2.0
|
Audio standards |
- G.711, G.722, G.722.1, G.729, AAC-LD, and Opus
|
Audio features |
- High-quality 20 kHz audio
- Subwoofer line out for Quad Camera
- Prepared for inductive loop (line out)
- Automatic Gain Control (AGC)
- Automatic noise reduction
- Active lip synchronization
|
Audio inputs |
- Three microphones, 4-pin mini-jack
- Two audio in from HDMI
|
- Audio outputs (external)
|
- 1 line out mini-jack (stereo) (Codec Plus)
- 1 RCA output for subwoofer (Quad Camera)
- 2 HDMI outputs
- HDMI input #1 supports Audio Return Channel (ARC): Audio output to Quad Camera speakers
|
Speakers (internal) |
- High-quality speakers
- Frequency response: 70 Hz to 20 kHz
- Max output level SPL 90dB
|
Speaker tracking |
- 6-element microphone array for accurate speaker tracking
|
Dual stream |
- H.239 (H.323) dual stream
- Binary Floor Control Protocol (BFCP) (SIP) dual stream
- Support resolutions up to 3840 x 2160p5 (4Kp5) and 1080p30
|
Wireless sharing |
- Cisco Spark client (up to 3840 x 2160p5)
- Cisco Intelligent Proximity client (up to 1920 x 1080p5)
|
Multipoint support |
- 4-way embedded SIP/H.323 conferencing capability with MultiSite option
|
MultiSite features (embedded multipoint) (optional upgrade) |
- Adaptive SIP/H.323 MultiSite
- 3-way resolution up to 1080p30 + content up to 4Kp5
- 4-way resolution up to 720p30 + content up to 4Kp5
- Full individual audio and video transcoding
- H.323/SIP/VoIP in the same conference
- Support for presentation (H.239/BFCP) from any participant at resolutions up to 3840 x 2160p5
- Best Impression (automatic continuous presence layouts)
- Encryption and dual stream from any site
|
Protocols
|
|
Embedded encryption
|
- H.323 and SIP point-to-point
- Standards-based: H.235 v3 and Advanced Encryption Standard (AES)
- Automatic key generation and exchange
|
IP network features
|
- DNS lookup for service configuration
- Differentiated services (Quality of Service [QoS])
- IP-adaptive bandwidth management (including flow control)
- Automatic gatekeeper discovery
- Dynamic playout and lip-sync buffering
- H.245 Dual-Tone Multi-frequency (DTMF) tones in H.323
- RFC 4733 DTMF tones in SIP
- Date and time support using Network Time Protocol (NTP)
- Media adaption and resilience
- Uniform Resource Identifier (URI) dialing
- Dynamic Host Configuration Protocol (DHCP)
- 802.1X network authentication
- 802.1Q Virtual LAN
- 802.1p (QoS and Class of Service [CoS])
|
Call Control
|
- Cisco Unified Communications Manager (CUCM)
- Native registration CUCM
- Requires CUCM Version 9.1(2) or later with device pack Room Kit
- Cisco Video Communication Server (VCS)
- Native registration with VCS
- Cisco Spark Service
- Third-party H.323 Gatekeepers and standards-based SIP proxies
|
|
- Single call stack support for both H.323 and SIP
- Dual-stack IPv4 and IPv6 for DHCP, SSH, HTTP, HTTPS, DNS, DiffServ
- Support for both static and automatic IP configuration (stateless address auto configuration)
|
|
- Management using HTTPS and SSH
- IP administration password
- Menu administration password
- Disable IP services
- Network settings protection
|
- Network interfaces codec medium
|
- One Ethernet (RJ-45) 10/100/1000 for LAN
- One Ethernet (RJ-45) 10/100/1000 for direct pairing with camera
- One Ethernet (RJ-45) 10/100/1000 with Power over Ethernet (PoE) for direct pairing with Touch 10
- Wi-Fi 802.11a/b/g/n/ac 2.4 GHz/5 GHz for LAN. 2x2 MIMO
- Bluetooth 4.0 LE
|
Other interfaces
|
- USB 2.0 port, uUSB, factory reset pinhole
|
Power supplies (2)
|
- 100 to 240 VAC, 50/60 Hz, 12V DC input
- Average 20 W, peak 70W
- Quad camera must be used with power supply FSP FSP070-AHAN2 or AcBel ADF019
|
Operating temperature and humidity
|
- 0°C to 35°C (32°F to 95°F) ambient temperature
- 10% to 90% Relative Humidity (RH)
|
Storage and transport temperature
|
- -20°C to 60°C (-4°F to 140°F) at RH 10% to 90% (noncondensing)
|
Locking mechanism
|
|
Dimensions
|
- Quad Camera:
- Width: 37.4 in. (95.0 cm)
- Height: 4.7 in. (12.0 cm)
- Depth: 4.0 in. (10.3 cm)
- Weight: 10.6 lb. (4.8 kg)
- Codec Plus:
- Width: 14.1 in. (35.9 cm)
- Height: 1.7 in. (4.3 cm)
- Depth: 5.6 in. (14.3 cm)
- Weight: 3.9 lb. (1.77 kg)
|
Camera overview
|
- 5K Ultra HD camera
- Support up to 60 fps
- 15.1 MP image sensor
- 1/1.7 CMOS
- 5x digital zoom (3 tele-lenses each with 50° horizontal field of view)
- f/2.0 aperture
- 83° horizontal field of view; 51.5° vertical field of view
- Auto-framing (audio + face detect)
- 5120 x 2880 pixel resolution
- Auto focus, brightness, and white balance
- Focus distance 1 m to infinity
|